Available in 50 to 66 ton models.

Fabmaster hydraulic ironworkers are designed with multiple functions to save time, labour, energy, and cost. They come with a work light and manual back gauge.

model style tonnage throat angle flat bar notching round bar hp
IW-50M single cylinder 50 3″x3″x5/16″ 14×5/8 2″ x 3 1/2″ x 1/4″ 1″ 5
IW-55A single cylinder 55 4″x4″x3/8″ 12×1/2 2″ x 3-1/2″ x 1/4″ 1-1/4″ 5
IW-66H single cylinder 66 4″x4″x1/2″ 14×5/8 2″ x 3-1/2″ x 5/16″ 1-1/2″ 7.5

Work Stations

  • Punching Station
    • Full range of punches and dies available
    • Quick change system for fast tooling change
    • Large 2 piece table with scales in inches and gauging stops (standard on all models)
    • Stripper designed for visibility, safety, and ease of use
    • Stripper with interchangeable plates with various openings to minimize deformation (standard on all models)
  • Flat Bar Shearing Station
    • Specially machined upper blade for clean shear with minimum distortion
    • 4 usable cutting edges on lower blade
    • Variable degree mitre-cutting on angle flange
    • Easily adjustable hold-down
    • Support table with guides for accurate positioning
  • Bar Shearing Station
    • One hold-down for various sizes of square bar shearing and round bar shearing
    • Optional channel and section bar shear tooling (available on most models)
  • Angle Shearing Station
    • Single shear with no material loss and minimal deformation
    • 45° easy and clean mitre-cut
    • Stationary blades with 4 usable cutting edges
    • Selectable corner radii on moving blades for optimum results on small or large angles
  • Notching Station
    • Ideal for notching of flat bars and angles
    • Electrically interlocked safety guard for maximum safety and visibility
    • Gauging table with stops for precise positioning

REQUEST A QUOTE FOR THIS MACHINE

Fill out the form and send it through to our team and we can help you get started with your inquiry.