Available in 66, 88, 110, 135, and 180 ton models.

Fabmaster hydraulic ironworkers are designed with multiple functions to save time, labour, energy, and cost. The double cylinder S/SD series is built for high power, quality, and reliability. These models are equipped with two foot control pedals that allow separate operations to be performed simultaneously. Features a large range of optional or custom-designed tooling.

Key features on dual cylinder ironworkers:

  • Separate double acting cylinder for independent operation from shearing stations
  • Cylinder ram with flat surface for rigid guiding to ensure proper alignment of tool
  • Keyed punch ram to ensure alignment of shaped tooling
  • Guided cylinder ram at 3 positions to provide extra support and absorb side-load forces for added protection of cylinder seals
  • Punching station features a large cylinder mounting plate to ensure maximum cylinder support under heavy load
  • One solid punching base plate with T-slot grooves for universal tool fixture
  • Monoblock machine frame construction that integrates both bolts and welding reinforcement to provide maximum frame structure rigidity
  • Machine base is made from welded channel in a grid pattern for a rigid machine foundation
  • Work light and electric back gauge

 

modelstyletonnagethroatangleflat barnotchinground barhp
IW-66Sdouble cylinder66125″x5″x1/2″14″x1/2″2-1/2″x3-1/2″x3/8″1-1/2″7.5
IW-66SDdouble cylinder66205″x5″x1/2″14″x1/2″2-1/2″x3-1/2″x3/8″1-1/2″7.5
IW-88Sdouble cylinder88126″x6″x 1/2″18″x1/2″2-1/2″x3-1/2″x1/2″1-3/4″10
IW-88SDdouble cylinder88206″x6″x 1/2″18″x1/2″2-1/2″x3-1/2″x1/2″1-3/4″10
IW-110Sdouble cylinder110126″x6″x 1/2″24″x5/8″2-1/2″x3-1/2″x1/2″1-3/4″10
IW-110SDdouble cylinder110206″x6″x 1/2″24″x5/8″2-1/2″x3-1/2″x1/2″1-3/4″10
IW-135Sdouble cylinder135126″x6″x 1/2″24″x5/8″2-1/2″x3-1/2″x1/2″2″15
IW-135SDdouble cylinder135206″x6″x 1/2″24″x5/8″2-1/2″x3-1/2″x1/2″2″15
IW-180SDdouble cylinder180208″x8″x3/4″30″x3/4″2-1/2″x3-1/2″x5/8″2-1/4″20

Work Stations

  • Punching Station
    • Full range of punches and dies available
    • Quick change system for fast tooling change
    • Large 2 piece table with scales in inches and gauging stops (standard on all models)
    • Stripper designed for visibility, safety, and ease of use
    • Stripper with interchangeable plates with various openings to minimize deformation (standard on all models)
    • Optional hydraulic stripper available
  • Flat Bar Shearing Station
    • Specially machined upper blade for clean shear with minimum distortion
    • 4 usable cutting edges on lower blade
    • Variable degree mitre-cutting on angle flange
    • Easily adjustable hold-down (optional hydraulic hold-down available)
    • Support table with guides for accurate positioning
  • Bar Shearing Station
    • One hold-down for various sizes of square bar shearing and round bar shearing
    • Optional channel and section bar shear tooling (available on most models)
  • Angle Shearing Station
    • Single shear with no material loss and minimal deformation
    • 45° easy and clean mitre-cut
    • Stationary blades with 4 usable cutting edges
    • Selectable corner radii on moving blades for optimum results on small or large angles
  • Notching Station
    • Ideal for notching of flat bars and angles
    • Electrically interlocked safety guard for maximum safety and visibility
    • Gauging table with stops for precise positioning

REQUEST A QUOTE FOR THIS MACHINE

Fill out the form and send it through to our team and we can help you get started with your inquiry.