Round at 45 deg. 14"
Round at 90 deg. 15"
Rectangular (Max. width) 8-1/2" x 21"
Rectangular (Max. height)15"x 17"
Blade size 1" x 13'-6"
Blade Speed 67 to 460ft/min continuously adjustable
Blade tension 25,000 PSI spring compensated
Blade guides Carbide with rollers
Table height 31"
Maximum work load 3,000 lbs.
Features:
Scissor type saw with heavy duty all welded design for rigidity and strength
Saw frame swings 45 degrees allowing mitre cutting without swinging the material
Cam lock of saw frame with frame angle indicating scale, hard stops at 0 & 45 degrees
Large base for stability with large coolant catch area
Pivot uses taper roller bearings for a highly rigid machine with smooth low friction
movement
Cutting feed hydraulically regulated with quick shut off to avoid valve adjustments
Magnetic motor starter with automatic shut off at the end of cut, motor thermal overload
protection
Power disconnect on machine
Blade guards and fully enclosed drive belt guard
Powered blade brush to remove cutting chips
Quick adjusting material clamp
Material discharge table, built in conveyor with 5 rollers for material feed
Adjustable material length stop for repetitive cutting
Steel wheels
Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
Flood coolant system to both saw guides with adjustable flow rates
Gear box designed for heavy duty bandsaw machines, precision worm shaft on taper roller
bearings and phosphorous bronze worm gear set
supported on sealed ball bearings, oil bath lubrication
Options:
Single phase power 220/1/60
Work light
Heavy duty drive, 5HP
Shipping crate
Power lift hydraulic
Power lift and power vise, hydraulic
Electrics:
208/230/460 or 575/3/60
3 HP
Weight (lbs) 1450 lbs.
Dimensions l/w/h 81"L x 46"W x57"H
Back to Baxter
