An Ideal Pulling Source.
If you don’t need straightening capabilities, but do require a pulling source to maintain a free loop for consistent feeding, Rapid-Roll is the answer. Many different models are available to meet flat or wire stock requirements.
Model: P1V
Max Material Width: 1-1/2" (38mm)
Recommended Operating Range: .0005"-.075"
Speed: Standard
Max Speed per min: 700" (1778cm)
AC Input Power Required: 1/4hp, 115vac, 1ph
Model: P1M
Max Material Width: 1-1/2”(38mm)
Recommended Operating Range: .0005”-.075”
Speed: Medium
Max Speed per min: 1,400”(3556cm)
AC Input Required: 1/2hp, 115vac, 1ph
Model: P4V
Max Material Width: 4”(102mm)
Recommended Operating Range: .0005”-.060”
Speed: Standard
Max Speed per min: 700”(1778cm)
AC Input Required: 1/4hp, 115vac, 1ph
Model: P4M
Max Material Width: 4”(102mm)
Recommended Operating Range: .0005”-.060”
Speed: Medium
Max Speed per min: 1,400”(3556cm)
AC Input Required: 1/2hp, 115vac, 1ph
Model: P1W
Max Material Width: wire
Recommended Operating Range: .005”-.150”
Speed: Standard
Max Speed per min: 700”(1778cm)
AC Input Required: 1/4hp, 115vac, 1ph
Model: P1WM
Max Material wire
Recommended Operating Range: .005”-.150”
Speed: Medium
Max Speed per min: 1,400”(3556cm)
AC Input Required: 1/2hp, 115vac, 1ph |
|
