| MODEL |
DESCRIPTION |
|
MiniServo Series
(MS2, MS4, MS8) |
So compact and economical, you can buy several to mount and
leave on individual dies, saving substantial set-up time while
assuring repeat accuracy. Also ideal for special machine applications. |
100CJ Series
(104CJ, 108CJ) |
Programmable roll feed, 99 job storage, feed advisor, feed complete signal,
Data Instruments and Link Press control compatible, batch count, adjustable
speed, acceleration/deceleration. Wide range of accessories, higher speed
than CJ Series with the convenience of 115 VAC. |
100D Series
(106D, 112D, 118D)
100T Series
(106T, 112T, 118T)
100TX Series
(106TX, 112TX, 118TX) |
Choose the performance you need (refer to performance charts).
Air pilot release and mechanical pilot release available.
Entrance guide roll or cascade roll available. Driven upper roll available. |
200T Series
(208T, 212T,
218T, 224T)
200TX Series
(208TX, 212TX,
218TX, 224TX) |
This servo feed group offers everything the 100 Series does plus a larger
feed roll diameter, higher capacity and higher speed. Air pilot release
and driven upper roll standard. Air regulated feed roll optional. |
300T Series
(336T, 348T) |
This servo feed group offers everything the 200T Series does plus
larger diameter rolls and the ability to feed up to 48" wide material. |
KBX Series
(KBX104S, KBX108S,
KBX112S)
(KBXP104S, KBXP108S) |
Programmable roll feed and flat stock straightener combined in one unit. All the features of a 100S Series plus the extra power to straighten .090 thick C.R.S. The KBX may be used as a Servo Feed alone by merely raising the straightening rolls. Patent pending.
Similar to KBX100S Series but with air pilot release. Patented. |
|
| Note: KBX Series provide floor space saving by eliminating the material loop between feed and straightener. |