LOOP CONTROLS
Proportional electronic loop control system is standard for powered models.
Loop Controls Model Selection
| Model | Description | Used With |
| RS1 | Rapid-Sense Ultrasonic Loop Control |
Reels, Straighteners & Power Rolls |
| RTB | Rapid-Touch Loop Control with Base Mounting | Reels, Straighteners & Power Rolls |
| RTA | Rapid-Touch Loop Control with Arm Mounting | Reels, Straighteners & Power Rolls |
| LLSEC |
Double Lo-Loop Spring Tension Control - Powered 100 Series Reels |
100 Series - Reels + Straightener Reel Combos |
| LLSEM | Double Lo-Loop Spring Tension Control - Powered 1000 Series Reel |
1000 Series - Reels + Straightener Reel Combos |
| LLSNC | Double Lo-Loop Spring Tension Control - Non-Powered 100 Series Reel |
100 Series - Reels + Straightener Reel Combos |
| LLSNM | Double Lo-Loop Spring Tension Control - Non-Powered 1000 Series Reel |
1000 Series - Reels + Straightener Reel Combos |
| LLR1C | Single Actuating Arm Remote Control - Powered 100 Series | 100 Series - Reels + Straightener Reel Combos |
| LLR1M | Single Actuating Arm Remote Control - Powered 1000 Series | 1000 Series - Reels + Straightener Reel Combos |
External loop control port included with all powered reels and straighteners
Our standard loop control for Rapid-Air power products is a pushbutton unit with digital display. This very flexible proportional control allows fine setting or speed, loop angle and loop height. A remote or external loop sensor may be plugged directly into this control as an alternate loop control.
Our standard loop control for Rapid-Air power products is a pushbutton unit with digital display. This very flexible proportional control allows fine setting or speed, loop angle and loop height. A remote or external loop sensor may be plugged directly into this control as an alternate loop control.
Standard features on DC drive reels and stock straightener loop control.
Both a lightweight low inertia loop sensing arm and a heavier, counterbalance arm can be used on all powered reel models. The counterbalanced arm fits directly through the loop sensing arm shaft. A counterweight can be shifted to apply more or less tension to material being payed out or rewound. When the lightweight arm is used, it fits into a sleeve that is inserted in the shaft hole and locked into place.
Both a lightweight low inertia loop sensing arm and a heavier, counterbalance arm can be used on all powered reel models. The counterbalanced arm fits directly through the loop sensing arm shaft. A counterweight can be shifted to apply more or less tension to material being payed out or rewound. When the lightweight arm is used, it fits into a sleeve that is inserted in the shaft hole and locked into place.
