FOUR ROLL HYDRAULIC PLATE ROLLING MACHINE WITH DUAL PRE-BENDING, MOD. MCA The MCA rolling machine line is the ideal apparatus to bend plate up to 10 mm thick and up to four metres wide. It is accurate, user friendly and fast (plate advancement speed of six mt/min) and represents the best available on the market today. The MCA also represents the ultimate in terms of design and innovation with advantages not available on other models. The leading edge is automatically calculated (when CNC is supplied) and this results in the shortest leading edge flat end on the market. The MCA can roll the plate without removing, turning or reintroducing the plate as required by a single leading pre-bending machine used for this range of plate thicknesses. Unlike three roll models that require pre-bending on both ends, the MCA only requires that leading edge is pre-bent.
MCB 4 Roll Bending Machine
FOUR ROLL HYDRAULIC PLATE ROLLING MACHINE WITH DUAL PRE-BENDING, MOD. MCB The MCB rolling machine line is the ideal apparatus to bend plate from 10 mm to 200 mm thicknesses with widths varying from two to up to six metres. It is accurate, user friendly and fast (plate advancement speed of six mt/min) and represents the best available on the market today. The MCB also represents advantages not available on other models. It can automatically pre-bend the leading edge leaving the shortest possible flat end. The MCB can roll the plate without removing, turning or reintroducing the plate as required by a single leading pre-bending machine used for this range of plate thicknesses. Unlike three roll models that require pre-bending on both ends, the MCB only requires that leading edge is pre-bent. Another important advantage is the possibility to make a shell in a single pass. The operator needs to identify only the lateral rolls position whereas on the three roll machine it is necessary to identify the six or nine positions to bend successfully a single shell.

Back to Davi Main