Baxter 475HFA Horizontal Fully Automatic
Features: Double column machine provides maximum capacity and rigidity Design utilizes linear bearings for high stiffness and smooth motion Hydraulic lift of the saw head Saw up travel can be set to minimize distance between the blade and the top of the material Saw down travel can be set to allow notching of blocks Electronic variable speed drive, panel adjustable Parts counter up to 9999 Fully-Automatic cut cycle, consists of material advance, saw cut at end of cut the saw head will raise to top, repeat untill parts counter decrements to 0 Manual saw control, saw up, rapid saw down, saw cut, vises open/close, shuttle advance/retract Cutting feed rate hydraulically adjusted Load sensing valve, which stops the feed if the blade starts to overload, typical when cutting the web of structural shapes Full stroke hydraulic vises, with stationary vise retract of 1/2" to avoid interference with material Top vises with replaceable heavy flexible strip to clamp uneven material Variable vise pressure Discharge table 37" wide by 24" long Steel wheel with ductile iron hubs Blade guides are carbide faced with rollers to remove blade twist and dampen vibration Flood coolant system to both saw guides and separate nozzle to allow coolant to center of cut with adjustable flow rates
Specifications: Blade Size 1 1/2"x18' 8" (38x5690 mm) Blade Speeds (FT/MIN) 60, to 400 (18 to 122m/min) Blade Tension (spring compensated) 30,000 psi Blade Guides Carbide with rollers Table Height 26-1/4" (660 mm) Maximum work load 7,000 lb. Machine Weight 5,200 lb. Overall Dimensions 119"x88"x80" (3020x2235x2030 mm)

< Back to Baxter