Waterjet cutting systems are the world's most versatile machine tools. Flow systems can cut almost any shape in a single step and with edge quality that usually requires no secondary finishing. They are the most productive solution today for cutting a wide range of material thickness from 1/16 inch to over 8 inches.
As the industry leader, Flow is the only firm which can offer both ultrahigh-pressure intensifier and HyPlex direct drive pumps. THey can insure our customers get the pump that is right for them and their unique application. Whether you machine high volume, short run, or prototype parts, a Flow system is the choice that will keep you competitive. Here's why:
No Other Tool Cuts or Machines a Greater Variety of Materials
From glass to stones to composites and metals, nothing cuts and machines a greater variety of materials than an abrasive waterjet. Their versatility is unmatched.
Setup and Fixturing Is Complete In Just Minutes
Side forces are virtually non-existent when cutting with a Flow abrasive waterjet so the time required for setup and fixturing is minimal. You can move quickly from job to job — cut 1/2 inch aluminum in the morning, 2 inch glass in the afternoon, and 6 inch stainless steel in the evening.
Different Jobs Do Not Require Different Tooling
Abrasive waterjet cutting is accomplished by software-controlled, robotic motion systems rather than hard tooling. There are no costly, time-consuming tool changes required to accommodate an infinite variety of shapes.
Multiple Heads Increase Productivity
The cool-cutting process of Flow abrasive waterjet systems enables you to increase throughput by stacking raw material and cutting multiple parts in a single pass. Running multiple cutting heads simultaneously further increases productivity.
Costly Secondary Finishing is Eliminated by Good Edge Quality
From steel to composites, cut net and near-net parts. Abrasive waterjets cut with erosion, rather than shearing or heat, so they produce exceptional edge quality without inducing heat-affected zones or mechanical stresses. Raw materials maintain their structural integrity; deburring and other secondary finishing are usually not required.
Save On Raw Material Costs
Abrasive waterjets cut with a narrow kerf and produce no heat allowing the operator to nest parts tightly to get the most out of the material.
Existing Technology Complimented
There is a trend today by many job shops to add waterjets to their operations as a complement to other cutting technologies such as EDM, laser, milling, and plasma. While each shop has its own requirements for cutting projects, most are finding waterjets to be a tremendous asset to their operations — enhancing both productivity and profitability.
For more information email one of our sales team!
Back to Flow Waterjet
