| DESCRIPTION | COE SERVO FEEDER | |
| MODEL | CPRF-SM 4 54 | |
| SERIAL | 24775-1 | |
| YEAR | NEW -2000 APPROX. | |
| CAPACITY | 54" X .070" MAX., 54" X.015" MINIMUM (MATERIAL THICK.) | |
| MAXIMUM STOCK WIDTH | 54" | |
| MATERIAL THICKNESS | (54" X .070") , (48" X .090") , (36" X .156") , (30" X.187") , (24" X .170") , (18" X .250") (MAXIMUM MATERIAL THICKNESS) | |
| FEED ROLL DIAMETERS | 4" (NUMBER OF FEED ROLLS) | |
| SPEED | 365 FEET / MINUTE APPROX., ACCELERATION 60 FEET/SECOND/SECOND | |
| FEATURES | - INDRAMAT DRIVE | |
| . | - AIR OPERATED HIGH SPEED PILOT RELEASE MECHANISM | |
| . | - PRESS MOUNTED WITH +/-3" OF PASSLINE ADJUSTMENT | |
| . | - SEALED PRECISION ROLLER BEARINGS | |
| . | - SINGLE ADJUSTABLE STROKE AIR CYLINDER FOR PRECISION PILOTING. | |
| . | - HAND CRANK ENTRANCE GUIDES | |
| . | - RIGID MACHINED TIE BAR CONSTRUCTION ASSURES PRECISE ASSEMBLY. | |
| . | - HIGH PERFORMANCE MAINTENANCE FREE AC BRUSHLESS SERVO DRIVE. | |
| . | - LOW INERTIA TORQUE DRIVE SYSTEM FOR COIL FEEDING APPLICATION. | |
| . | - NON STRETCH SYNCHRONOUS KELVAR TIMING BELT DRIVE TRAIN | |
| . | - PRECISION CLUSTER GEAR ARRANGEMENT TO DRIVE UPPER ROLL | |
| . | - TRUE PIVOT UPPER ROLL TO ASSURE FULL GEAR MESH | |
| . | - ADJUSTABLE RADIUS 3 ROLL CATENARY SECTION FOR CORRECT LOOP SUPPORT. | |
| . | - REMOTE JOG PENDANT FOR EFFECTIVE MATERIAL THREADING. | |
| . | - ERGONOMIC DESK-TYPE SLANT TOP ELECTRICAL ENCLOSURE. | |
| . | - OILTIGHT FLEXIBLE CONDUIT ON FLOOR BETWEEN ROLLFEED AND CONSOLE. | |
| . | - EMERGENCY STOP PUSHBUTTON | |
| . | - FUSED ELECTRICAL SAFETY DISCONNECT | |
| . | - SINGLE CYCLE PUSHBUTTON FOR SET-UP AT JOG SPEED. | |
| . | - SPRING LOADED AIR CYLINDER FOR PILOT OPERATION | |
| . | - UPPER AND LOWER FEED ROLLS WITH #5 SATIN CHROME FINISH. | |
| . | - 575 VOLT TRANSFORMER | |
| . | - CML-LA CONTROLLER WITH 13 GAG OUTPUTS | |
| . | - FULL WIDTH UPPER AND LOWER FEED ROLLS | |
| ELECTRICS | 240V WITH REMOVABLE 575V TRANFORMER | |
| WEIGHT | 3,000 LBS. | |
| DIMENSIONS | SERVO WITH CONTROL APPROX.(80"L X 45"F-B X 50"HT), 3 ROLL CATENARY (56" X 40" X 15") | |
| CONDITION | PRE-OWNED | |
| FOB POINT | OUR PLANT, MISSISSAUGA, ONTARIO, CANADA | |
| |
